- Home
- Submissions
Submissions
Submission Preparation Checklist
As part of the submission process, authors are required to check off their submission's compliance with all of the following items, and submissions may be returned to authors that do not adhere to these guidelines.
- The submission has not been previously published, nor is it before another journal for consideration (or an explanation has been provided in Comments to the Editor).
- The submission file is in OpenOffice, Microsoft Word, or RTF document file format.
- Where available, URLs for the references have been provided.
- The text is single-spaced; uses a 12-point font; employs italics, rather than underlining (except with URL addresses); and all illustrations, figures, and tables are placed within the text at the appropriate points, rather than at the end.
- The text adheres to the stylistic and bibliographic requirements outlined in the Author Guidelines.
Author Guidelines
Submissions
Online Submissions
Already have a Username/Password for Journal of Intelligent Decision Support System (IDSS)?
GO TO LOGIN
Need a Username/Password?
GO TO REGISTRATION
Registration and login are required to submit items online and to check the status of current submissions.
Author Guidelines
[Update on December 07, 2018]
Carefully read the submission guidelines as follows:
A. General Requirements
The minimum standard requirements of Journal of Intelligent Decision Support System (IDSS) must be
- Written in English.
- The length of submitted paper is at least 4 pages and no more than 10 pages. Editors will be evaluated if the papers are needing more pages than 15 pages.
- Use of a tool such as Mendeley for reference management and formatting, and choose APA style
- Make sure that your paper is prepared using the Journal of Intelligent Decision Support System (IDSS) paper template when if it accepted.
B. Structure of The Manuscript
The manuscript must be prepared and suggested present follow the structure:
- The title of the manuscript. The title of the paper is maxed 2 words, without Acronym or abbreviation, The title should be informative and be written both briefly and clearly. It has to be accurate and specific describe the contents of the article that will be discussed. The title should contain highlights or the subject of this paper. The main ideas should be written first and followed then by its explanations. The article title does not contain any uncommon abbreviation. The article title should be written within words in English, 15pt-sized font, with the bold selection and title case in the center text format.
- How to Write the Name, and the Author’s Affiliation, The author’s name should be written without an academic degree. If the author’s name consists of at least two words, the last name should not be shorted (to avoid miss citation). If there is more than one author, the author’s names should be written separately by a comma (,). If the author’s names are only one word, it should be written as it is. The name of author should be written in 10pt-sized font, with the bold selection and the center text format. Then, should give one line spaces between the author’s name and the author’s affiliation followed by email address with the center text alignment in 10pt-sized font, without the bold selection. The responsible author, the correspondence author, or the corresponding author must be written first and then followed by the second, the third, and so on. The communication regarding the article revision and the final statement will be informed via email to the corresponding author only.
- Abstract. The Abstract has a maximum 250 WORDS; No citation; State in the abstract a primary objective, research design, methodology, main outcomes, and results, and the conclusions. The abstract must contains: aims of the paper, methods, result, and conclusion within 200-250 words maximum. Abstract should be written stand-alone, means that no citation in the abstract, not referring to figure/ table / references. Avoid using uncommon abbreviations. You must be accurate, brief, clear and specific. Keywords are the labels of your manuscript and critical to correct indexing and searching. Therefore the keywords should represent the content and highlight of your article. Keyword should be separated by a comma (,) within three to five keywords.
- Section structure. Authors are suggested to present their articles in the section structure: Introduction - The Proposed Method/Algorithm (optional) - Method - Results and Discussion – Conclusion.
- IntroductionThe introduction must contain a general background (shortly), a literature review (state of the art) in order to record the existing method/solutions, to show which is the best of previous researches and to show the main limitation of the previous researches. It has be contain with at least 5 literature in order to justify novelty this paper. The introduction should be clearly contain the gap analysis (why this research needs to be done? What is the uniqueness of this paper compared to previous papers?) as the basic of the new research question, statements of the new scientific article and main research problems (novelty). Example of novelty statement or the gap analysis statement in the end of Introduction section (after state of the art of previous research survey): “........ (short summary of background)....... A few researchers focused on ....... There have been limited studies concerned on ........ Therefore, this research intends to ................. The objectives of this research are .........”.
- Methods/Algorithm The method is applied to solve problems including procedures, measuring and analytical methods. Methods should make the reader able to reproduce your experiment. Provide enough detail to allow the work to be reproduced. The published method should be indicated by reference: only relevant modifications should be explained. Do not repeat details of existing methods, just refer it from the literature.
- Results and DiscussionThis part consists of the research results and how they are discussed. The results obtained from the research have to be supported by sufficient data. The research results and the discovery must be the answers or the research hypothesis stated previously in the introduction part. The discussion should explore the significance of the results of the work, not repeat them. Make the discussion corresponding to the results, but do not reiterate the results. The following components should be covered in discussion: How do your results relate to the original question or objectives outlined in the Introduction section (what/how)? Do you provide interpretation scientifically for each of your results or findings presented (why)? Are your results consistent with what other investigators have reported (what else)? Or are there any differences?
- ConclusionThis is the final part containing conclusions and advices. The conclusions will be the answers of the hypothesis, the research purposes and the research discoveries. The conclusions should not contain only the repetition of the results and discussions. It should be the summary of the research results as the author expects in the research purposes or the hypothesis. The advices contain suggestions associated with further ideas from the research
- References. Expect a minimum of 25 references primarily with a minimum of 80% journal articles that have a reputation and are not more than 5 years old. (All the references that used in the article must be listed in this part. In this part, all the used references must be taken from primary sources (scientific journals and the least number is 80% from all the references) that published in the last ten years. Each article should has at least ten references. References should be numbered and the numbering in order of appearance in the text. When referring to a references in document text, write the references number in square brackets, eg: [1]. All the served data or quotes in the article taken from the other author articles should attach the reference sources. The references should use a reference application management such as Mendeley.
- Please contact info (WA) +6281381215442 for the problems.
Here is the explanation in Indonesian:
- Apakah naskah sudah disesuaikan dengan template terbaru?
- Pendahuluan, Studi Literatur, Metode, Hasil dan Pembahasan, dan
- Kesimpulan sudah dituliskan terpisah.
- Tidak menggunakan Bullet / Numbering pada naskah.
- Panjang naskah antara 4 - 10 halaman.
- JUDUL DAN INFORMASI PENULIS
- Judul ditulis secara singkat, mendeskripsikan isi dan kontribusi naskah.
- Judul juga tidak menggunakan singkatan atau akronim kecuali yang standar.
- Judul terdiri dari maksimal 14 kata.
- Semua penulis telah ditulis dalam naskah dan juga dalam sistem OJS.
- Salah satu penulis yang berhubungan melalui sistem OJS ditentukan sebagai penulis korespondensi.
- Semua penulis harus menyertakan email dalam naskah dan sistem OJS.
- Informasi afiliasi ditulis dalam 1 baris pada teks, paling sedikit menunjukkan nama lembaga dan negara.
- Seluruhnya Judul naskah ditulis huruf kecil, kecuali Huruf pertama pada Judul.
- Tempat dan waktu penelitian tidak perlu dicantumkan dalam judul.
- ABSTRAK DAN KATA KUNCI
- Abstrak terdiri dari 200 hingga maksimal 250 kata.
- Abstrak disusun secara terstruktur. Terdiri dari Latar Belakang,
- Tujuan, Metode, Hasil, dan Kesimpulan
- Jumlah kata kunci minimal 3 kata, dipisahkan dengan tanda titik koma dan bukan merupakan potongan dari judul.
- Semua kata kunci harus ditulis dalam abstrak.
- Kata kunci disusun menurut abjad.
- Kombinasi semua kata kunci mewakili konten, kontribusi, atau tujuan teks.
- Kata kunci dapat berupa kategori subjek penelitian. Hindari menggunakan kata sifat sebagai kata kunci dalam teks.
- PENDAHULUAN
- Telah menjelaskan konteks / objek penelitian dan fokus mengikuti cakupan judul.
- Telah menjelaskan mengapa penelitian ini penting.
- Ini termasuk kesenjangan penelitian yang ada, menjelaskan perbedaan unik antara penelitian ini dibandingkan dengan penelitian serupa sebelumnya.
- Memiliki tujuan / kontribusi penelitian tertulis secara eksplisit.
- Untuk mendukung penelitian yang sedang dilakukan, peneliti harus menelaah, mengupas dan memberikan beberapa penelitian terdahulu. Dalam hal ini minimal 3 penelitian terdahulu yang mutakhir dengan maksimal 5 tahun ke belakang.
- Panjang bagian ini antara 300 - 700 kata.
- METODE
- Telah mengutip sumber yang membantu penulis dalam pemilihan metode.
- Telah menjelaskan bagaimana data diperoleh, diolah, di analisis.
- Prosedurnya ditulis secara kronologis dan jelas (kerangka penelitian).
- Penulis telah menulis bagaimana hasil akan diukur, diuji, dan dievaluasi.
- HASIL DAN PEMBAHASAN
- Hasil penelitian ditulis dalam urutan logis, sesuai alur penelitian pada bagian metode penelitian.
- Hasil penelitian disajikan dalam bentuk naratif / tekstual, tabel, atau gambar dalam bentuk grafik atau diagram. Hindari menampilkan data mentah. seluruh tabel, gambar, grafik, diuraikan dan dijelaskan keterangannya.
- Pembahasan Penjelasan tentang hasil dan analisis mendalam telah ditulis.
- Perbandingan hasil dengan penelitian lain telah ditulis.
Batasan studi atau ancaman terhadap validitas telah ditulis.
- KESIMPULAN
- Memberikan ringkasan temuan utama
- Memberikan kontribusi penelitian
- Berikan implikasi penelitian
- Berikan batasan penelitian
- Berikan penelitian di masa depan
- Kontribusi naskah dan jawaban atas pertanyaan penelitian telah dituangkan secara eksplisit.
- Kesimpulan sudah dituliskan dalam 1 paragraf utuh.
- REFERENCES
- Selalu gunakan alat kutipan otomatis untuk mengelola referensi Anda. Pastikan Anda sudah memeriksa ulang metadata kutipan, alat kutipan otomatis biasanya memiliki kesalahan metadata.
- Gunakan Mendeley untuk membuat Kutipan & Referensi / Bibliografi. Gunakan gaya kutipan Edisi APA (APA Style).
- Pastikan semua informasi yang terkait dengan referensi ditulis dengan lengkap (mis. Siapa, Dimana, dan Kapan). Periksa dari sumber utama untuk informasi ini. tulis nama jurnal tanpa singkatan. harap sertakan DOI jika tersedia.
- Mengutip minimal 25 referensi. minimal 80% berasal dari artikel jurnal Internasional bereputasi Tinggi / konferensi. minimal 80% harus diterbitkan dalam 5 tahun terakhir.
- Lebih dari 80% referensi harus berasal dari sumber yang kredibel. misalnya ScienceDirect, IEEE Explorer, ACM Digital Library, Springer Link, Scopus, Clarivate Analytics, dan jurnal terakreditasi nasional Indonesia (SINTA 1/2).
- TABEL DAN GAMBAR
- Sudah menggunakan format yang sesuai dalam menampilkan gambar dan tabel pada Template.
- Gambar atau grafik harus sangat jelas, sehingga tidak bergantung pada teks.
- Resolusi gambar minimum tidak ditentukan (beresolusi tinggi), tetapi harus terlihat ketika dipublikasikan secara online (berwarna) atau dicetak (hitam dan putih).
- Gambar tidak memiliki masalah hak cipta.
Semua gambar dan tabel telah direferensikan dalam naskah. - Jumlah maksimum gambar dan tabel masing-masing adalah 10. memberikan alasan kepada editor jika Anda perlu menampilkan lebih dari jumlah yang disarankan.
- LANGUAGES
- Tidak ada kesalahan ejaan, kesalahan ketik, dan kesalahan tata bahasa. Anda dapat menggunakan alat bantu seperti Grammarly atau rekomendasi yang disediakan oleh MS Word untuk pengecekan bahasa.
- Gunakan kalimat langsung dan pendek. Kalimat yang panjang tidak membuat tulisan menjadi lebih profesional; mereka hanya membingungkan pembaca.
Submission Preparation Checklist
As part of the submission process, authors are required to check off their submission's compliance with all of the following items, and submissions may be returned to authors that do not adhere to these guidelines.
- I certify that I have read, understand and agreed to the submission guidelines, policies and submission declaration of Scientific Journal of Informatics. Submission already using the provided template.
- I certify that all authors have approved the publication of this and there is no conflict of interest.
- I confirm that the manuscript is the authors' original work and the manuscript has not received prior publication and is not under consideration for publication elsewhere and has not been previously published.
- I confirm that all authors listed on the title page have contributed significantly to the work, have read the manuscript, attest to the validity and legitimacy of the data and its interpretation, and agree to its submission.
- I confirm that the paper now submitted is not copied or plagiarized version of some other published work.
- I declare that I shall not submit the paper for publication in any other Journal or Magazine till the decision is made by journal editors.
- If the paper is finally accepted by the journal for publication, I confirm that I will either publish the paper immediately or withdraw it according to withdrawal policies.
- The submission has not been previously published, nor is it before another journal for consideration (or an explanation has been provided in Comments to the Editor).
- The submission file is in OpenOffice, Microsoft Word, RTF, or WordPerfect document file format.
- Where available, URLs for the references have been provided.
- The text is single-spaced; uses a 10-point font; employs italics, rather than underlining (except with URL addresses); and all illustrations, figures, and tables are placed within the text at the appropriate points, rather than at the end.
- The text adheres to the stylistic and bibliographic requirements outlined in the Author Guidelines, which is found in About the Journal.
- If submitting to a peer-reviewed section of the journal, the instructions in Ensuring a Doble Blind Review have been followed.
Copyright Notice
Authors who publish with Journal of Intelligent Decision Support System (IDSS) agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0). that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- I certify that I have read, understand and agreed to the submission guidelines, policies and submission declaration of Journal of Intelligent Decision Support System (IDSS). Submission already using the provided template.
- I certify that all authors have approved the publication of this and there is no conflict of interest.
- I confirm that the manuscript is the authors' original work and the manuscript has not received prior publication and is not under consideration for publication elsewhere and has not been previously published.
- I confirm that all authors listed on the title page have contributed significantly to the work, have read the manuscript, attest to the validity and legitimacy of the data and its interpretation, and agree to its submission.
- I confirm that the paper now submitted is not copied or plagiarized version of some other published work.
- I declare that I shall not submit the paper for publication in any other Journal or Magazine till the decision is made by journal editors.
- If the paper is finally accepted by the journal for publication, I confirm that I will either publish the paper immediately or withdraw it according to withdrawal policies.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
Privacy Statement
The names and email addresses entered in this journal site will be used exclusively for the stated purposes of this journal and will not be made available for any other purpose or to any other party.